Coolers

Commerical Duty Plate Coolers

• Reinforced Inlet
• Full Drain Leak Detect
• Strong Metal, Plate to Plate Alignment Device
• Improved Heat Transfer
• Fully Sanitary, meets current 3A/FDA Requirements
• Titanium and Alternate Alloy Plates Available
• Standard, High Tempature Nitrile, EDPM and Fluorocarbon (Viton®) Materials
• Increased Efficiency
• Higher pressure design - 150 psi.
• Full Metal-to-Metal alignment to prevent plate shifting
• Strong Side Band Gasket Groove Support
• Improved Leak Detect Meets current 3A Sanitary standard 11-05
• Wide Gap to Resist Fouling
• Available Standard AISI 316 S.S. (22 ga.) Thickness (alternative alloys available)

Safegard Model #080
Plate/Pass	End Plate	Milk Cap.	Approx. Dry Weight	Part #
25 Plate / Single	Stainless	.65 gal.	200 lbs.	47317
45 Plate / Single	Stainless	1.45 gal.	224 lbs.	47318
25 Plate / Single	Powder Coat	.65 gal.	200 lbs.	47319
45 Plate / Single	Powder Coat	1.40 gal.	224 lbs.	47320
Plate Only			1.3 lbs.	47317-1
Gasket only				47317-2

Safegard Commercial Duty Powder Coated Series Heat Exchangers w/High Floor Frame
Plate/Pass	End Plate	Milk Cap.	Approx. Dry Weight	Part #
35 Plate / Single	Powder Coat	2.5 gal.	558 lbs.	47321
77 Plate / Single	Powder Coat	5.4 gal.	665 lbs.	47322
99 Plate / Single	Powder Coat	6.8 gal.	737 lbs.	47323
Plate Only			2.8 lbs.	47321-1
Gasket only				47321-2

Safegard Commercial Duty Stainless Steel Series Heat Exchangers w/High Floor Frame
Plate/Pass	End Plate	Milk Cap.	Approx. Dry Weight	Part #
35 Plate / Single	Stainless	2.5 gal.	788 lbs.	47324
77 Plate / Single	Stainless	5.4 gal.	905 lbs.	47325
99 Plate / Single	Stainless	6.8 gal.	967 lbs.	47326